Key Specifications/Special Features:

Introduction:
 

EX-9486-L-DIO which is ARM9 Embedded digital signal controller on ethernet/RS485 network of ARM9 , to proceed and control digital input and digital output，used in switches control or monitoring；with TCP/IP standard interface and Web Server，it can be developed the remote function of monitoring and control from far end，and also provided RS-232 and RS-485 serial communication interface，it can be connected with different kind of devices  or instrument cluster。

EX-9486-L-DIO Easy Development for the Application System
EX-9486-L-DIO use ATMEL AT9G20 400MHz ARM9 RISC processor, with 64MB SDRAM and 128 MB Flash to be the core of system, built in Embedded Linux OS kernel 2.6.x and File system, and provided abundant communication, control interface and corresponding drivers.
Under Linux or Windows operation systems, users via the built in C/C++ Compiler and the software developed tool of Lib can proceed the design of application software and obtained related technical support to complete the system programming and development.

TCP/IP Network Communication & Web Server
EX-9486-L-DIO have one set of high speed Ethernet Interface and Web Server built in, user can easily develop a set of remote controller system through the web to proceed monitoring and control. USB Interface of EX-9486-L-DIO can be connected the 802.11 Wi-Fi or 3G wireless interface to make the TCP/IP communication to completely.

High speed serial interface
EX-9486-L-DIO has 3 RS232 and 1 RS485 COM port, the highest baud rate of each COM port goes to 921.6Kbps which to make users connecting any kind of devices, instrument cluster and machine for the monitoring control.

Fully Digital Signal Control Interface
EX-9486-L-DIO with 3 kinds of Digital Signal Control interfaces of digital signal control. Isolate the signal of digital input control which may connect with different kind of switched, buttons and sensors to proceed real time monitoring; Relay output control which can normally for switches controller, even can directly to control or switching the devices or instrument cluster. GPIO can make users define for Input or Output control.

Industrial Rackmount/Wallmount design
The design of Rackmount and Wallmount that to meet the requirement of using and setting up on many harsh and environmental maintainess, Voltage input range 9~40V; standard Terminal Block & Connector for easily to make wiring and construction.

Features

H/W Specifications
CPU/Memory
CPU: ATMEL AT91RM9200 (ARM9-core)
Clock: 180MHz
SDRAM: 64MB
Flash: 16MB
EEPROM: 2KB
CPU：ATMEL AT9G20 400MHz ARM9 @400MHz
Memory：64MB SDRAM, 128MB NAND FLASH
Digital Output:
4 DO
Relay: N.O./ N.C./ COM
240VAC@5A / 24VDC@5A
5.00mm Terminal Block
Ddigital Input:
4 DI
5~24VDC
2000Vrms Isolation
Wet/ Dry (Selectable by jumper)
5.00mm Terminal Block
GPIO:
32 points Input/ Output Selectable
3.3 VDC CMOS
2.54mm 10x2 pin grid
Network Interface:
RJ-45 connector x 1
10/100BaseT (Ethernet)
TTY (Serial) Ports:
RS485 X 1
P1：Data+, Data-, GND
5.00mm Terminal Block
RS232 x3:
P2 : TxD, RxD, RTS,CTS, DTR, DSR, DCD,GND
P3 : TxD, RxD, GND
P4：TxD, RxD, GND
DB9 male
Management Setting:
Utility(window)
Console: TCP/IP Network(Web, Telnet) & Serial port
LED: Power Supply, Digital Signal, TCP/IP, Serial
Dimension:160 x 125 x 20 mm
Weight：240gw
Others:
Real Time Clock x 1
Watchdog:
Buzzer x 1
9~40VDC
Power Connector: 5.0mm Terminal Block
Power Consumption: 1.2A@12VDC
Operating Temperature: 0~50℃
Humidity: 20%~80% RHG

S/W Specifications

General
OS: Linux kernel 2.6.29
Boot Loader: U-Boot 1.3.4
File systems: JFFS2, EXT2/EXT3, VFAT/FAT, NFS
Protocol stack:
IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V2, SSL, SSH 1.0/2.0
Package Management & System Administration
bash, busybox, sysvinit, wget, ipkg, psmics, vsftpd, ssh iptable, ppp, wireless_tools, usbutils, lighttpd, Topsccc utility, til-linux-mount/umount, procps (for webmin),ipkg, webmin
Daemons:
Web server(lighttpd), telnetd , ftpd(vsftp)
UART port:
P4 x1 : TxD, RxD, RTS,CTS,GND (common with RS232 P4)
3pin 2.54mm wafer male
TTY (Serial) Port Parameters:
Baud Rate：300 ~ 921,600 bps
Parity：None, Even, Odd, Mark, Space
Data Bits：5, 6, 7, 8
Stop Bit：1, 1.5, 2 bits
Flow Control：RTS/CTS, XON/XOFF, None(RS-232 Only)
Console:
RS-232 (TxD, RxD, GND), 115,200 bps, VT-100, 4-pin 2.00mm wafer male
USB ports:
USB port x 2
USB 2.0 compliant
Mass Storage:
One SD 1.0 compliant socket inside syslog/klogd, ssh, amgrd (Topsccc broadcast search daemon)
Linux/Windows(tool chain):
GCC: C/C++ PC cross compiler for Linux
GLIBC: POSIX Library
Device Drivers:
SD/MMC, UART, Real Time Clock, Buzzer, Ethernet, Digital I/O, Watchdog Timer
Real Time Clock: Ricoh RS5C372
EEPROM: ATMEL AT24C16 and  compatibles
USB Driver for Expandable:
Flash thumb disk
IEEE-802.11b/g WiFi adapter (Ralink rt73usb, Ralink rt2500usb, Realtek RTL8187, ZyDAS zd1211rw)
10/100Mbps Fast Ethernet adapter (RT8150)
RS-232 adapter (prolific PL-2303)
ISDN Modem