Features:

The embedded board featuring AMD LX800 processor supporting one DDR SO-DIMM socket, up to 1GB Non-ECC Non-Registered DDR SDRAM. AMD CS 5536 chipsets supporting un-registered non-ECC DDR 200 MHz SDRAM with maximum memory up to 1GB and integrated graphic controller supporting both standard VGA and TFT.
The EX9362-40 embedded board supports a various range of Operating Systems
such as Windows XP embedded, Win CE, and Linux. The EX9362-40 with low power processor, small footprint, and versatile I/O port to offer the best solution for industrial applications.

Specifications:
 

CPU
■ AMD Geode™ LX800,500 MHz on Board
with 128 KB L2 cache (64 KB I-cache/64 KB
D-cache)

 
Main Memory
■ 1 x 200-pin SO-DIMM socket, up to 1GB
Non-ECC/Non-Registered DDR SDRAM
(64-bit, 200 MHz)
 

Chipset
■ AMD Geode LX800 / AMD CS 5536
 

BIOS
■ Award system BIOS
■ Plug & Play support
■ 4M bits flash ROM ACPI
■ ACPI support: Only support Software
Shutdown by 5Vsb provided
 

On-board LAN
■ 1 x Realtek 8100C 10/100 Fast Ethernet Controller
 

I/O Interface
■ Supports Boot From LAN (PXE)
■ Supports Wake on LAN
■ 1 x RJ45 with LED
■ 4 x USB 2.0 port (USB 1,2,3,4 on front,) → EX9362-40-U4
■ 2 x USB 2.0 port (USB 1,2,on front,) → EX9362-40-C4
■ On-board D-sub 15pin VGA * 1
■ 2 x UART Pin Header (1 * RS-232, 1* RS-422/485) → EX9362-40-U4
■ 4 x UART ( COM 1: D-Sub 9pin support
RS-232, COM2: Pin Header Support
RS-232, COM 3/4: Internal pin header
support 422/485) → EX9362-40-C4
■ Parallel ports: Bi-directional, EPP/ECP support, 1 x Box header 26-pin connector
■ PS/2: 1 x 6-pin Box Header
■ FAN: 1 x FAN JST connector (for CPU)
■ IrDA: 1 x 5-pin Box Header for IrDA,TX,RX
■ 1 x 3 pin header for SM Bus, one pin for GND
1 x 2 pin header for Reset switch
1 x 2 pin header Power LED
1 x 3 pin header for I2C BUS, one pin for GND
 

Storage Support
■ CF: 1x Internal CompactFlash socket Support One Type I& II Compact Flash
Card
■ IDE: 1 x 44-pin IDE connector,support Ultra DMA 33/66/100 1 x 2-pin IDE Active
LED Header
Watchdog Timer
■ Watchdog Timer is programmable by software from 0 to 255 seconds and from 0
minute to 255 minutes
  

On-board RTC
■ On chip RTC with battery back up
■ 1 x External Li-ion Battery
 

Extension PCI
■ PC/104+ (PCI-only)
 

Power Input
■ Supports both AT and ATX Mode(BIOSand H/W is default to AT mode)
■ AT Mode: +5V Power in, No Power On push Button, Software Shutdown function
and LAN remote wake up
■ ATX Mode: Power Required: +5V / -5V / 5Vsb Power In When Change to ATX
Mode,the BIOS default setting is as follow: POWER -SUPPLY TYPE -->[ATX]
AUTO PWR-FAILURE RESUME-->[ON] 

Dimensions
■ 3.5" form factor, 146 mm (L) x 105 mm (W)
(5.7”x 4.1”)
   

Environment
■ Board level operating temperature:-40°C
to 70°C
■ Storage temperature:-20°C to 85°C
■ Relative humidity: 10% to 90% (Non-condensing)
  

Certifications
■ CE approval / FCC Class