Key Specifications/Special Features:

■ CPU + Chipset: NS Geode GXLV/GX1 & CX5530A chipset with built-in 6x86
-166/233/300/333 MMX CPU, GXLV support low-power CPU (1.5W ~ 5.4W), GX1 support very-low-power CPU (0.8W ~ 3W)
■ Cache Memory: 16KB L1 cache memory
■ I/O Chipset: NS PC97317 + SMC669
■ BIOS: Award BIOS, 128KB (Flash) EPROM
■ DRAM: 1 x 144-pin SO-DIMM socket support up to 128MB SDRAM and low-profile application
■ LCD/CRT w/ MPEG II: SMA 64-bit TFT LCD/CRT, support CRT and 18-bit TFT
LCD flat panel up to 1280x1024x8 BPP and 1024x768x16 BPP, support MPEG1 and
MPEG2 assist, 44-pin LCD connector. Optional DSTN daughter board.
■ 100/10M Ethernet with BOOT ROM: Intel 82559 100/10Mbps Ethernet with optional BOOT ROM
■ 100/10M Ethernet x 2: Optional 2nd Intel 82559 100/10M Ethernet on board
■ Flash Disk SSD: 32-pin socket for DiskOnChip SSD 8MB ~ 288MB
■ Optional Compact Flash II socket: Support IDE Flash Disk or IBM 340MB/1GB
Micro Drive HDD
■ Audio: 16-bit stereo FM synthesis, OPL3 emulation
■ Touch Panel interface: Optional
■ USBX2 and IrDA: Pin header
■ High-quality NTSC/PAL TV-out: Optional on board
■ LVDS/DSTN daughter board: Optional
■ GPS Socket: Optional socket for 2nd generation GPS
■ Bus type: PC/104 socket and PCI slot
■ Speaker: Buzzer on Board
■ CMOS Backup: Backup by Li battery
■ PS/2 Keyboard +PS/2 Mouse: 8-pin header
■ IDE Interface x 2: Support up to 4 x IDE devices
■ FDD: Two 3 1/2" or 5 1/4" FDD, Drives A, B swappable
■ Parallel Port: One bi-directional SPP/EPP/ECP
■ Serial Port x 4: 16-byte FIFO 16C550 serial port jumper selectable RS-232 x 3
+RS-232/422/485 x 1(Serial Port support +5V and +12V voltage)
■ Watchdog Timer: Programmable 0 ~ 1024 sec.
■ Power Requirement: +/-5V, +/-12V power by using ATX connector; or, single +5V by 2-pin connector with optional hi-current +12V for LCD inverter
■ Dimension: 203mm x 146mm
■ Operating Temperature: 0 ~60°C. 0 ~ 85°C CPU just need metal cooler (don't need fan)