EX9000/EX9000-Modbus Series
     
   
 
 
EX9060-MTCP                                                                          Modbus TCPIP to 5DI(Isolated) & 3DO(Relay)
 

Special Features:

 

■ Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP
 ■ Ethernet 10/100 Based-T Communication
 ■ Support 3 relay ch. (RL 1/Form A, RL2/3 Form C)
 ■ Provide Pulsed/delay Output Mode
 ■ Support 5 Isolated digital Input Channels
 ■ Provide Counter/Frequency Inputs Mode
 ■ Support Dry/ Wet Contact Inputs
 ■ Fully Photo-Isolation 3750Vrms
 ■ Status LED indicator
■ EX9000-MTCP series Utility/Software/Command/Web Server Support:
Utility of EX9000-MTCP
TCPDAQ(Ethernet I/O) ActiveX Control
TCPDAQ(Ethernet I/O)DLL API
TCPDAQ(Ethernet I/O)Data Structure
ASCII Command
MODBUS Command
Web Server
  

Specifications:

 
 
     larger photo
   User Manual
 

Driver

       9000-MTCP Utility

       Demo
     Pin Assignment
Block Diagram
Interface:
Communication 10/100 Based-T Ethernet
Protocol Modbus/TCP, TCP/IP, UDP, ICMP and ARP
Led indication Led for power and Ethernet link status
Isolation voltage 3750Vrms
Digital Input:
Input channels 5
Input type single ended with common source/ ground
Dry contact :
logic level 1 (inactive) : open
logic level 0 (active): Close to GND
Wet contact :
logic level 0 (inactive) : +2VDC max
logic level 1 (active): +4V to 30VDC max
Logic level status can be inversed via ASCII/Modbus command
Counter Input 500Hz counter input (32-bit+1-bit overflow)
Digital Output:
Output channels 3 Relay output
Relay type RL1/Form A, RL2/3 Form C
Relay contact rating 0.6A/125Vac, 2A/30Vdc
Surge Strength 500V
Operate Time  3mS max
Release Time 2mS max
Min Life  5*10 ops
Pulse output Each channel supports 500Hz pulse output
Power requirement:
Consumption 1.8W
Power input 10~30VDC (unregulated)
Humidity 5~95% RH, non-condensing