|
Key
Features
EX-9100J is 1 Ethernet Input (data only) port and 1 Output (data + power) port Power over Ethernet Injector that is designed for small or medium network environment to strengthen its network connection. This product can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding EX-9100J to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore.
No Special Networking Cable Required
By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both power and data where power source is difficult to obtain. It helps you reduce installation time and cost.
|
Specification
|
|
Standards
|
|
IEEE-802.3af
|
|
IEEE
802.3 10BaseT
|
|
IEEE
802.3u 100BaseTX
|
|
Features
|
|
Number of Ports : 1 Ethernet
Input (data
only) Port , 1 Ethernet Output
(data +
power) Port
|
|
Led
Indicators
|
|
Per
Port: PoE Act/Status
|
|
Per
Unit: Power
|
|
Power
Input
|
|
90~260V/AC,
50~60Hz
|
|
Power
Output
|
|
48V/DC
at Full 15.4 W Output Supported
|
|
Power
Consumption
|
|
19
Watts (Max)
|
|
Dimensions
|
|
120
× 50 × 35 mm (L x W x H)
|
|
Weight
|
|
0.14
kg
|
|
Operating
Temprature
|
|
0
to 40℃
|
|
Storage
Temperature
|
|
-20 to 85℃
|
|
Humidity
|
|
10 to 90% RH
(non-condensing)
|
|
Certifications
|
|
FCC Class A, CE
|
|
Ordering
Information
|
|
EX-9100: 802.3af Power
over Ethernet Injector with 48VDC/15.4W output
|
|
|
|
Driver
Pin
Assignment
Block
Diagram;){kind=link}