Key Specifications/Special Features:

Feature:

■ CPU+Chipset: NS Geode GXLV/GX1 & CX5530A chipset W/ on-chip 6x86-166/233/300/333 MMX CPU, GXLV support low-power type (1.5W~5.4W),
GX1 support very low-power type (0.8W~3W)
■ Cache Memory: 16KB L1 cache memory
■ I/O Chipset: NS PC97317
■ BIOS: Award BIOS, 128KB (Flash) EPROM
■ DRAM: 1 x 168-pin SO-DIMM socket support 8MB ~ 128MB SDRAM
■ LCD/CRT: On-chip shared-memory 64-bit LCD/CRT,support CRT and 18-bit TFT LCD flat panel up to 1280x1024x8 BPP and 1024x768x16 BPP, support MPEG1 and MPEG2 assist, 44-pin LCD connector
■ DSTN signal: Support opional DSTN daughter board
■ 100/10M Ethernet: Realtek 8139 100/10M Ethernet
■ Flash Disk SSD: 32-pin socket for DiskOnChip SSD 8MB ~ 288MB
■ Audio signal: Support AC97 audio daughter board
■ Touch Panel interface: Optional
■ CompactFlash II socket: Optional CF-2 socket for IDE Flash Disk or IBM MicroDrive 340MB/1GB HDD
■ Bus type: PC/104 Connector & PISA (PCI+ISA) bus
■ IrDA and USB x 2
■ Speaker: Buzzer on Board
■ CMOS Backup: Backup by Li battery
■ PS/2 Keyboard: 5-pin header and 6-pin mini-DIN
■ PS/2 Mouse: 5-pin header and 6-pin mini-DIN
■ IDE Interface x 2: Support up to 4 x IDE devices,
■ FDD: Two 3 1/2" or 5 1/4" FDD, Drives A, B swappable
■ Parallel Port: One bi-directional SPP/EPP/ECP parallel port configured as LPT1,2,3
■ Serial Port x 2: 16-byte FIFO 16C550 serial port jumper selectable RS-232 x 1 +RS-232/422/485 x 1(Serial Port support +5V & +12V voltage)
■ Watchdog Timer: Programmable 0 ~ 1024 sec.
■ Miscellaneous Connectors/Jumpers: Reset, HDD LED, single +5V or +5V/+12V by FDD type 4-pin power connector, 3-pin ATX control pin
■ Power Requirement: +5V, +12V power by using 4-pin power connector; or, single +5V by using same 4-pin power connector; also support ATX control pin for connect to ATX power connector on backplane
■ Dimension: 185mm x 122mm
■ Operating Temperature: 0 ~ 60°C.0 ~ 85°C CPU just need metal cooler
(don't need fan)