Single Board Controller Series
     
   
 
 
EX9527                                                                                                
 

Key Specifications/Special Features:

 

Feature:


CPU+Chipset: NS Geode GXLV/GX1 & CX5530A chipset w/ on-chip 6x86-166/233/300/333 MMX CPU, GXLV support low-power type (1.5W~5.4W), GX1 support very low-power type (0.8W~3W)
Cache Memory: 16KB L1 cache memory
I/O Chipset: NS PC97317 + SMC 669
BIOS: Award BIOS, 128KB (Flash) EPROM
DRAM: 1 x 144-pin SO-DIMM socket
LCD/CRT: On-chip shared-memory 64-bit LCD/CRT, support CRT and 18-bit TFT LCD flat panel up to 1280x1024x8 BPP and 1024x768x16 BPP, support MPEG1 and MPEG2 assist, 44-pin LCD connector
DSTN signal: Support optional DSTN board
Flash Disk SSD: Socket for 8~288MB DiskOnChip
Audio: Optional AC 97 audio soldered on board
Touch Panel interface: Optional
CompactFlash II socket: Optional CF-2 socket
Bus type: PC/104 Connector and ISA bus
IrDA and USB x 2
Speaker: Buzzer on Board
CMOS Backup: Backup by Li battery
PS/2 Keyboard/Mouse: 5-pin header/ mini-DIN
IDE Interface x 2: Support up to 4 x IDE devices,
FDD: Two 3 1/2" or 5 1/4" FDD, Drives A, B swappable
Parallel Port: One bi-directional SPP/EPP/ECP
Serial Port x 4: 16-byte FIFO 16C550 serial port jumper selectable RS-232 x 3 +RS-232/422/485 x 1(Serial Port support +5V & +12V voltage)
Watchdog Timer: Programmable 0 ~ 1024 sec.
Miscellaneous Connectors/Jumpers: Reset, HDD LED, +/-5V & +12V 4-pin power connector, 3-pin ATX control, 2-pin single +5V power connector
Power Requirement: +/-5V, 12V power by using 4-pin power connector; or, single +5V by using 2-pin power connector; also support ATX control pin
Dimension: 185mm x 122mm
Operating Temperature: 0 ~ 60°C. 0 ~ 85° CPU just need metal cooler
(don't need fan)

 

 


 

 

 

 
     larger photo
   User Manual
 

Driver